The Dana 44 Front Crate Axle.
Offering gear ratios for Dana 44 Axles ranging from stock 3.45's to the lowest 5.38 for extreme power to turn some large tires, Yukon allows you to balance your Jeeps daily demands with its performance. Set Descending Direction. Compare the gasket shape to Nationwide Parts' Axle Identification Chart to determine the Dana model number.
ring gear". 10040651 Spicer Dana 44 Advantek Jeep JL Rear Nodular Iron Differential Cover.
Now with the innovative Crate Axle program, you can get the exact axle you need right out of the box.
Renegade, Scrambler, Commando, Sahara and all terms are used strictly for identification purposes only. Available gear ratios were 2.72, 3.07, 3.31, 3.54, 3.73, 4.09, 4.27 and 4.54. $2,790.00 +$149.99 Surcharge (oversized) Price match guarantee. $1,049.00.
Dana 60 BOM Lookup. After 1974 Dana 44 front and rear axles became standard on all Scout IIs.
.
Featuring a number of upgrades for added on-trail durability, plus added strength wherever you take your vehicle, the Ultimate Dana 44 axle is built to meet the demands of . I cleaned that area pretty good and didnt see anything. $32.99.
Total new guy, Bought my first Jeep last week, Gladiator Sport S with max tow.
I have the front axle out of a 2016 jeep jku rubicon. do NOT contact me with unsolicited services or offers. 1969-1975 Jeep CJ5 w/ Dana 44 rear axle 1969-1975 Jeep CJ6 w/ Dana 44 rear axle 1986 Jeep CJ7 w/ Dana 44 rear axle 1986 Jeep CJ8 Scrambler w/ Dana 44 rear axle . Upgrade your axle shafts for less than the cost of original replacements. 34 items . Then, to find parts compatible with that axle, click on the link in the right column that will take you to the corresponding AxleBuilder.com page. I know on the dana axles theres supposed to be either a 44 or a 60 stamped onto the web that comes off of the diff and runs into the tube. However, the Dana Aftermarket Media Library can be used to identify all aspects of a particular axle using the Bill Of Materials number. Dana axles set the standard for other aftermarket axle manufacturers who call their axles "Dana 44s" - just like most of us call cotton swabs "Q-tips.". The first appearance of the 44 was in 1948, when it was installed under the back of CJ-3As. !It is a low pinion dana 44,non radiaus arm axle with 8 lugs and smaller than 3" axle tubes!!!
Dana Crate Axle Ultimate Dana 44 Front Axle The Ultimate Dana 44 axle is a direct bolt-in solution that delivers optimal strength, durability, and performance.
We offer a large selection of Willys Jeep Rear Axle parts, including Bearing Cones, Bearing Cups, Gaskets, Seals, Axle Shafts, Spider Gears and more. Here's a front Dana 44 cover from Rancho, an RS-6209. A Dana 60 looks deceptively similar to a Dana 44, but the 60's 9 3/4-inch ring gear diameter is a major factor in strength. Dana 44 vs. Dana 60 Axle Identification Guide Techline: Easy ways to ID your 4x4's rear end. The Ultimate Dana 44 AdvanTEK front-drive unit axle offers a choice of gear ratios to help you achieve optimum performanceand it's ready to install right out of the crate.
Jeep Factory Axle Identification Chart OEM Axle I.D. #) (Date) Corporation axle identifica--tion is located on axle tube between the Steering Shock Absorber Bracket and the Spring Mount Pad.
Country or origin 2. Dana models 25, 27, 30, 60, 70 and 80 have identical gasket shapes and bolt counts and therefore must be identified by locating the identification tag. The problem is that I don?t know what vehicle they came from. How To Identify A Dana Spicer Axle. The Bill of Material number may also be found on the carrier in some models as shown in illustration (2A).
Not all Dana 44 axles are equal - know the facts about the new generation Dana 44, salvage yard and new 44 .
The dana 44's and 60's both have 10 bolts that mount the cover as well.
Rock-proof nodular-iron Dynatrac differential cover included. Similar Items. Page. Trak-Lok limited slip differentials were optional.
YG Wrangler bolt in Dana 44 complete axle jeep offroad 30 spline arb ultimate axle,CAA:D44-YJ-R,D44-YJ-R,D44-YJ,D44-,D44.
Works for both a Dana 30 or 44. The Dana 44 is built with an 8.5-inch ring and pinion and has a spline count of 19 or 27 with two-piece axle shafts or a spline count of 30 with a one-piece axle shaft. While the Dana Expert BOM Tool can be helpful . How To Identify A Dana Spicer Axle Refer to the appropriate model number section for parts identification and a breakdown of the Bill of Material. alright got another question for you guys, the waggy axle i have in my truck now has flat tops that i had drilled and tapped, they are the big bearing spindles, and 6 lug pattern, if i were to use those knuckles on this ford hp axle what would i need for 8 lug? Engineered for off-road. Axle model identification 3. . post id: 7393838504. But it looks like a Dana 44. DANA 41 The 41, which has a ring gear size similar to the Dana 44, came in early CJ-2As.
Mar 23, 2020. It features a 8.5" ring gear, 19, 30, or 32 spline semi-floating axle shafts, and is available in both solid axle and IFS/IRS configurations for front and rear (standard and reverse rotation) applications. This information will help to locate information in this book and to identify the correct parts for servicing. Idaho Falls, ID. It is normal to want the best for your JL Wrangler, so Yukon Gear & Axle Ring and Pinion Gears have been engineered to run cooler and quieter than the competition. I assume the LS is factory? Jeep Dana 44 identification. A collection of quick tips on how to identify some of the more common types of differentials, and an overview of the different styles of axles you may find u. The spiders are the same as a 44's, but the carrier and gears aren't. It is almost universally swapped out in favor of a Dana 44. Speaking of Dana 44 rears, I took the rear out of my "E-Bay" car (a 66 Commander 2 door) & cleaned it up to install in the 59 wagon because it had 3:31 gears in it & is a flanged axle. DRIVE AXLES DRIVE AXLE ASSEMBLY TAG 1.
Santaquin, UT. All Spicer Carrier Type axles are identified with a manufacturing date (1) and Bill of Material number (2) stamped on the right or left hand tube on driving axles. Commonly 7 or 8 digit ident number plus manufacture date. From $199.99 $229.99. For independent front suspension (IFS . Dana 44. The alloy-case Dana 28, with a 6 5/8-inch-diameter ring gear, came in Bronco IIs and Rangers with anything but the 4.0 . Dedicated jeepers like you expect your vehicle to dominate challenging off-road routes .
From $2,695.99. The Dana 44 was also a popular choice as a rear differential for kit cars and still is used extensively for four-wheel-drive conversions on classic trucks as well. 1980 to 1985 would have a Dana 60 or the very rare Chrysler 9 1/4 HD 8-lug rear axle and a Dana 44 HD frontend with manual or auto hubs. Put those axle models into Google images and you'll see distinctive characteristics of each. Dana Axle Identification. After 1974 Dana 44 axles became standard on all Scout IIs.
6 on 5.5 bolt pattern.
Here is a quick vid to help those tell what you have for an axle.
Ive been trying to figure out what model and year this Dana 44 I purchased came out of for the past several months and have had minimal luck. Description: Dana 486 Rear Bolt In Axle Assembly Semi-Float with Dual Bolt Pattern: 5x4.5 and 5x5.5 Base Axle Includes: * Brand New Dana 486 Casting Bracketed with Heavy Duty Brackets (100% USA. i also have a dana 44 from an 85 dodge 3/4 ton (with lockouts and flat tops . Rubicon's are equipped with a new design Dana 44 in the front and rear. Find Dana 44 for sale near you or sell to local buyers. The axle model number is cast in to the housing (30, 44, 60) either on the right (facing the axle cover) lower web at the point where the axle tube is pressed in to the center section or in the nose of the .
1975 to 1979 would have a Dana 60 rear axle and Dana 44 HD front axle with full-time and disc brakes. It's D44 for sure, don't know if its hp or not, 4.09 on the tag is the ratio, D44's came in a 4.09 and D60s were 4.10, and they are consider matched at that. The Dana 44s with the two piece shafts are 19 spline or 27 spline and the versions wih the once piece shafts are 30 spline. But make no mistake: if you're not buying genuine Dana, you're not getting the same . Getting around to checking the differentials on my '73 CJ5 project and according to Chilton the front is a Dana 30 (it looks like a Dana 30) and the rear is an "AMC 8 7/8 in. Dana 44 4.56 Ring And Pinion. AXLE IDENTIFICATION Figure 4 5329-4 All Spicer axles are identified with a manufactur ing date and the complete part.
I have been told but not confirmed that GM only used the dana 44 3/4 ton through 1979. This axle is ident.ified with 1/8" (3.17 mm) high stamped numbers. Dana 27 & 30 were used in Scout 80 800 A B. I know the guy I got it from said it came from a "ford van conversion"whatever that means:shaking: Rear Axle Dana 41 & Dana 44 1945-1971 Jeep Models (Tapered Axle Shafts). [Archive] O/T dana axle identification General FSJ Tech. The Spicer Independent Rear Suspension assembly is identified by numbers which are stamped on the carrier. All Dana axles have a Bill of Materials (BOM) number stamped into the long axle tube that can be used to look up many of the axle's important details including the gear ratio, ring gear rotation, differential type and spline count, as well as a complete list of replacement parts. Add to Wish List .
See all 1 photos. Are they one in the same? The Dana 44 has been manufactured as a beam axle and independent suspension for . Traditional BOMs are 6 digits followed by 1 or 2 digits, and start with the numbers 60 or 61. Dana 60 Rear offset just a tad and comes in widest. $100.00. I looked up the bom number that was stamped on the axle tube(603121 4) and on many sites it. The Sticker says I got the HD Dana 44 Wide front/rear axles and the Jeep page says i go M210 and M220 axles (F/R). Here's a Dana 44 front differential below, a G2 Front Dana 44 Assembly, Part D44TJFA456. I just bought it with the . I recently purchased an 8 lug dana 44 from somebody on this board for my K5 Blazer. The Dana 44 axle has been used in various forms in nearly every Jeep model.The Dana 44 was used in the front of many full sized Jeeps or was an option in most Jeeps as a rear axle upgrade.
Dana 60 BOM Axle Codes. There was a series of spline and .
You're currently reading page 1; Page 2; Page 3; Page Next; Show per page. G2 Axle & Gear Standard Ring and Pinion Installation Kit for 86-06 Jeep Wrangler TJ, TJ Unlimited & CJ-7 with Dana 44 Rear Axle. 3.73.
The axle model number is cast in to the housing (30, 44, 60) either on the right (facing the axle cover) lower web at the point where the axle tube is pressed in to the center section or in the nose of the housing near the .
The Bill of Material (BOM) number is used to identify Dana differentials. How To Identify A Dana Spicer Axle. If you need model 44 axle parts, we have what you are looking for. On all Spicer carrier type axles the manufacturing date and Bill of Material number are stamped on the right or left tube for identification and model number stamped on the casting.
The optimal solution for customization. Traditional BOM's are 6 digits followed by 1 or 2 digits and start with the numbers 60 or 61. Both of these are semi-floating axles.
The BOM will identify the model number, the gear ratio, the type of axle / differential, and component parts.
Identification: Dana axles are very easy to identify and their numbering system is consistent irregardless of the vehicle they came in. Dana 44 front axles special order in 1974. I am looking for a little help ID'ing the Dana 44 Rear axle on a JK, I need this information so I can compare it to a Chevy Dana 44 axle on the Chevy Colorado ZR2. To help you find the right part, we first need to properly identify the axle you have or need. For example: A Chevy 1/2 ton pick-up may have a Chevy 10 bolt rear axle or a 12 bolt rear axle.
ARB air locker D44 30 spline 3.73 and down . Dana 44 Front Axle; Dana 44 Front Axle.
On a Dana 44, you will see a large castle nut threaded onto a ball joint.
The case itself is 9-3/8 inches in diameter. DANA 44 All domestic manufacturers have used Dana axles, and the 44, with its 8 1/2-inch ring gear, is likely I noticed that it was stamped with what appears to be an 81 date code. The number 605234-1 is the Front is a Dana 30.
Rear is either a Dana35, Dana44, or Chrysler 8.25 axle. $1,339.95. The Dana 44 Front Crate Axle. The Dana 44 axle has been in use since the 1940s and is still a very popular axle today.
The fronts have the changes needed for spindles, while the rear ones allow for the axles to accept bolt-on wheels. The Dana brand has long been synonymous with proven quality and performance. Sort By.
Jump to Latest Follow 1 - 10 of 10 Posts . Tech Info. The R&P ratio ranges supported by the carriers are 2.87-3.73 and 3.92-5.89. There are different Dana 30 gear sets for the YJ, TJ and JK.
12-05-2010, 08:53 PM Thread Starter #3. In Scout IIs until 1974 Dana 30 front axles and Dana 44 rear axles were standard. Revolution Gear & Axle offers Ring and Pinion Gear Sets in several different ratios for the following axle models, across all years of the Jeep Wrangler.
Axle Shaft Bearing Dana 44 With Tapered Axles Axle Shaft Bearing Dana 44 with Tapered Axle ShaftsFits:1948-1949 Jeep CJ2A1948-1953 Jeep CJ3A . The strongest end forgings, made by Dynatrac in the USA.
com/dana-44-locking-hubs. The Dana brand has long been synonymous with proven quality and performance.
The Bill of Material number may also be found on the carrier in some models as shown in illustration (2A). Im undecided at the moment wether to keep the Np231 or go with a dana 300 tcase. In Scout IIs, Dana 30 front axles and Dana 44 rear axles were standard until 1974, with front Dana 44 axles as a special order.
This is the yoke off a Dana 30 axle. All of these axles take different parts so we need to properly identify the axle you have to get the right part.
It is like the VIN number for your axle assembly. Re: Dana axle identification. Each Dana/Spicer unit has a unique inspection cover and gasket shape. It can be found in many 3/4-ton pickup and van rear ends. Dynatrac Pro Rock Front Axle Housings. Revolution replacement series axles are made from 1541H Steel and utilize a state of the art computer control Revolution Gear and Axle, Replacement series, Rear axle shaft for Jeep D44, 85-92 Comanche MJ, 84-96 Cherokee XJ and 97-06 Wrangler TJ w/D44, Left Hand, 29.2 Inch 30 Spline (OE# 75786-2X / Hollander# 447-2717).
The model number and date are self explanatory.
Spindle bearing for Dana 44. Help identify my dana 44. Onyx Ceramic Hub Bearings (6806) (Silver). They make a good on road axle as proven in the Dodge Viper, but they had lots of problems in the Grand Cherokees - with many people having them rebuilt/replaced under warranty. 1986-1991 Full-Size Jeeps Front Axle: Driver side drop Dana 44 (6-lug) or Dana 44 HD (8-lug) The 6-lug axle comes in both narrow and wide versions (Grand Wagoneer is narrow, J-truck is wide) The 8-lug is wide only Rear Axle Dana 44 (6-lug) offset just a tad Note, some early 1986's have been .
Part no: RCV-CVJ44-JK. Ford F-150 with Dana 44 Series Axle 1978, Front Heavy Duty Axle Shaft Kit by Alloy USA. Click on the resulting . They have a ring gear diameter of 7 and 1/8 inches. Get a direct bolt-in solution that delivers increased strength wherever you take your vehicle. The Bill of Materials (B.O.M) number is stamped on the right or left hand tube of the driving axles and with the help of a Spicer catalog you s 1972 to 1975 would have a Dana 60 rear axle and Dana 44 HD front axle with part-time and drums. This is a quick model of a Dana 44 GM 6 on 5. is in reference to this. Add to Cart. Dana 44 - JK Rubicon Front Dana 44 - JK Rear Ring Gear Diameter: 8.5" / 216mm Ring Gear Diameter: 8.89" / 226mm Pinion Diameter / Spline: 1.625" / 24 Pinion Diameter / Spline: 1.625" / 24 The chart below identifies Dana Axles used in Jeeps over the years. The Dana 44 axles in the 1950 to 1975 Jeep CJ narrow track and all .
axle is a complete hub to hub GM dana 44 from a 1/2 ton pickup or blazer.
To find the complete build details of any Dana 60 axle, locate the BOM number stamped into the long axle tube and then find that code in the table below. Front-Drive Unit (FDU) axles from Dana offer an independent suspension system for front-drive axles in four-wheel drive Ford sport utility vehicles such as the .
Mar 28, 2017.
Several variations of the Dana 44 have been used as the rear axle in Jeeps, all of them use a 8.5" ring and pinion. Alloy USA Ring & Pinion Sets for 92-06 Jeep Cherokee XJ, Wrangler TJ & Unlimited with Low Pinion Dana 30 Front Axle.
In fact, that's the most ground clearance of any Dana 44-based axle.
The Dana 30 gear ratios are either 3.21 or 3.73.
View as Grid List. Each axle contains a gear ratio tag (4), and if the axle is equipped with a limited slip differential, it will have a tag specifying the type of limited slip lubricant to be used (5). The front axle is a Dana 44 and the rear may be an Eaton HO52. The Dana axle identification BOM's are six digits long and begin with the number 60 or 61 followed by 1 or 2 digits, such as 605561-1.
67" WMS to WMS. Not all vehicles are set up the same, even though they may be the same make and model. SAS, rockcrawler, toyota, jeep, D44, D60, axle, GM, 4x4, 4 wheel drive. The Dana 44 was first manufactured in the 1940s and is still being manufactured today, both front and rear axle variants.
So any ideas of what this came out of originally would be great!!!
On a Dana 30, you will see a king pin cap with four bolts . Note the way the ends are made for spindles.
I know its a Dana 44 and I know its out of an International.
Depends a lot on year of jeep, options, etc. Patented ProRock shape delivers more ground clearance than a Dana 30. The optimal solution for customization. Find this Pin and more on Jeep Front Axle Parts by Midwest Jeep Willys. The BOM will identify the model number, the gear ratio, the type of differential, and all component parts. After cleaning it up I could see that the 44 was cast on the front of the .
I was under the impression that it came from a GM 3/4 ton vehicle. I hope this helps others figure out what axle they have and what axles will work.GM used d. The quickest way to tell which axle your Bronco has is to look at the top of the steering knuckles where the Front End Housing is connected to the Knuckle. . Need to see if the axle tube still has Dana Bill of Materials numbers stamped into it, that has a date code. The differential cover on the 44 is shaped almost like a hexagon and has a half-inch male fill plug.
The axle im concerned with is the front high pinion dana 44s. Front Axle Identification. The Dana 44 was first manufactured in the 1940s and is still being manufactured today, both front and rear axle variants. Now with the innovative Crate Axle program, you can get the exact axle you need right out of the box. The "Dana Expert" website is no longer available. Dana 30. The Dana 44A may seem like a great idea - all the parts are just a touch bigger than the standard Dana 44 - but in reality they just do not hold up to offroad abuse. I found some numbers on the 44 but none appear to be the BOM number and I can?t find much at all on the rear. Differential Cover Kit JL Dana 44 AdvanTEK Rear Spicer nodular Iron differential cover. Dana 60 Spindle nut kits 4 slot. First I wondered if it even was a 44 because there wasn't the 44 on the right rear web. The Dana brand is the global leader in drivetrain components. Both differentials are limited slip and 4.27 ratio. just the caliper brackets and hubs from a 3/4 ton chevy? EXAMPLE 610079-9 XXXXX (Ident. Ford F-150 1978, Rear Axle Stud by Yukon Gear & Axle.
The Dana 44s have 10 bolt holes.
To help you find the right part, we first need to properly identify the axle you have or need.
Each axle cover should have a tag to ID the Axle, if not the Lineticket can be checked to ID the axle and ratio. The front has "44 5F" on the front bottom right of the center section. The Dana 44 was used on and off throughout the history of Jeeps. Dana axle identification is located on axle tube between Steering Shock Absorber Bracket and the Carrier. Navigate to the Dana Aftermarket Media Library; Enter the BOM number in the Keyword Search field (top left corner of the page). The width of the axle shafts is 1.13 inches. RCV Ultimate Dana 44 Front CV Axle Set, Pair. Later-model Dana axle identification charts may start off with the first three digits of 200 rather than 60 or 61, for example 200561-1. DANA 70 Almost identical in appearance to a Dana 60, the Dana 70 is standard in heavy Dodge pickups and GM duallies. Axle Model Identification, Part Number and Serial Number are located on a tag at the axle centerline. Rear Axle Identification. These Alloy USA performance axles shafts are made from heavy-duty steel. Dana axles are very easy to identify and their numbering system is consistent irregardless of the vehicle they came in. Search listings for Dana 44 and other items on KSL Classifieds. Diagram at the URL below, date code is month, day, year, and something like shift and assembly line.
It has a Chevy 350 and this winter will be getting a TH350 tranny.
Jeep Axle: Dana 44. All Spicer Carrier Type axles are identified with a manufacturing date (1) and Bill of Material number (2) stamped on the right or left hand tube on driving axles.
Dana 30: This axle size is the most common, and you'll only find it on the front of Jeep. Big hub Dana 44 WARN.
Dana 44 Axle Parts, Gears, and Upgrades. Product Code: 52799 (thats why i asked just to make sure i wasnt missing anything) John Cappa Author Four Wheeler Staff Author. I am trying to understand some of the listing on both the Sticker and the Jeep website. Chart The illustration below will help identify the Dana Axle in your Jeep. The Dana/Spicer Model 44 is an automotive axle manufactured by Dana Holding Corporation and is used extensively among automobile manufacturers and in the automotive aftermarket area as well. Vehicle info 1991 Jeep Wrangler YJ.
The axle i have for the rearend is a 98 Explorer. The Dana/Spicer Model 44 is an automotive axle manufactured by Dana Holding Corporation and is used extensively among automobile manufacturers and in the automotive aftermarket area as well.
The Dana 44 has been manufactured as a beam axle and independent suspension for .
How To Identify An Early Bronco Dana 30 & Dana 44. Not all vehicles are set up the same, even though they may be the same make and model. For full-performance differential covers that are engineered with the serious off-roader in mind, and get the same name you trust for all your drivetrain . MOPAR Dana 30 Front Axle Housing - 3.73 Gear Ratio. The military Model 25 has a thick, cast cover, while the 27 and civilian-model 25s have a thinner cover, will accept taller gears, and backed V-6s.
Axle Identification Chart. number. The number in the name (Dana 30, Dana 44, etc.) Spicer (Dana) 44 axles use an 8-1/2-inch ring gear bolted to the carrier by 10 bolts that are 3/8 x 24 right-hand thread.
These Danas are indistinguishable in appearance. The Sport JL's have a Dana 30 front axle, 186mm, for comparison. The BOM stamp (2) or Axle Identification Tags (2A) are used to identify Dana axles / differentials. It is not implied that any part listed is a product of, or approved by . 8 9 THE ULTIMATE DANA 44 FRONT AXLE for the JEEP WRANGLER JK Engineered for all Jeep Wrangler JKs, 2007 to 2018, Ultimate Dana 44 front axles feature a number of upgrades designed for added durability on the trail.
View Details. These axles have a 7.2" Ring Gear Diameter. Dana 44 Front Crate Axle. Part no: 68004069AB.
Tacoma Municipal Court Clerk, Signing Off Message To Team Sample, Haptic Feedback Ps5 Controller, Wolford Mountain Reservoir Swimming, Christopher Knight Dining Chairs, Another Word For Reader Or Audience,